FANDOM


Partslist for double Z Axis:

2x: 400mm T8 Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut http://goo.gl/VdWd4Y

1x: 5mm x 8mm Aluminum Flexible Shaft Coupling OD19mm x L25mm CNC Stepper Motor Coupler Connectorhttp://goo.gl/iSV7Gi

1x: orig. Tevo Stepper + connector ( jst ph 6 pin)

1x :cable to extend stepper http://goo.gl/YvjRnU

1x http://www.thingiverse.com/thing:1427340

2x Oldham Coupler V4.1 - from download section of the FB grp.

3x M4 x 8 for stepper mount

4x M3 x 10 or M3 x 15 for the stepper

With above thread the Esteps in the config.h needs to bet set to "400":

#define DEFAULT_AXIS_STEPS_PER_UNIT   {XXX,XXX,400,XXX}

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.